Various best made in China replacement parts in Nakhon Pathom Thailand Single Drum Hydraulic Winch 35ton with top quality

Various best made in China  replacement parts  in Nakhon Pathom Thailand Single Drum Hydraulic Winch 35ton with top quality

We – EPG Team the most significant gearbox & motors , couplings and gears manufacturing facility in China with 5 various branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

                                               Numerous solitary drum hydraulic winch 35ton

A variety of one drum hydraulic winch 35ton— Introduction
Hydraulic winches, also acknowledged as hydraulic winch, are utilised in a variety of lifting gear instances. Varieties are divided into:
developed-in hydraulic winch, exposed hydraulic winch, high-pace hydraulic winch, reduced-pace hydraulic winch,

A variety of one drum hydraulic winch 35ton— Main structures
hydraulic winch typically by the hydraulic motor, management valve, equipment bins, rollers, brackets, (clutch) Rope, set up bracket and
other mixtures.

Numerous solitary drum hydraulic winch 35ton— Application
Some hydraulic winch does not consider stand, right by the hydraulic motor, manage valve team, the drum, the conclude of the shaft and
other factors, these can be based mostly on consumer demands matching, can be extensively utilized in conveyor tensioners, construction
equipment Lifting cranes this kind of as truck cranes, crawler cranes, aerial work platforms, forestry cranes, and port vessels this kind of as
port cranes, floating cranes, dredgers, crane cranes and davits, as well as heavy lifting equipment This sort of as oil rigs, offshore oil rigs,
rotary drilling rigs for piling equipment, rock drills, main drills, hydrostatic piles, and more.

A variety of one drum hydraulic winch 35ton—Attributes
1) Only flow restrictors and manifolds are on the exterior of the drum. Hydraulic motors and shell to drive units and other
factors are hidden in the winch drum, so the axial size is little, compact, beautiful physical appearance
two) Starting performance and transmission effectiveness, reduced vitality consumption, reliable, lengthy provider existence
three) minimal sounds during procedure
four) great economic performance.

 

Design

Pulling Power

(kN)

Rope Velocity Complete Displacement
(ml/r)
Wor ept stress Diameter
of Rope
(mm)
Rope potential Motor Sort
NY2.5-8-sixty five-9 eight -40 553 13 9 65 BM3-100F125711
NY2.5-10-sixty-ten 10 -forty 695 13 ten sixty BM3-125F125711
NY2.5-twelve-60-ten 12 -35 884 12.five ten 60 BM3-160F125711
NY2.5-15-55-eleven fifteen -thirty 1105 12.5 11 55 BM3-200F125711
NY2.5-eighteen-50-twelve eighteen -25 1389 12 twelve fifty BM3-250F125711
NY2.5-20-fifty-12 twenty -20 1769 10.5 12 50 BM3-300F125711
NY3-thirty-sixty five-fifteen 30 -35 2125 15.9 15 sixty five XHS2-420D51
NY3-40-sixty-16 forty -35 2711.5 sixteen.four 16 sixty XHS2-500D51
NY4-50-70-20 50 -forty 4365 sixteen.3 twenty 70 XHS3-900D245711
NY4-sixty-68-21.five 60 -40 5428.five 16 21.five 68 XHS3-1000D245711
NY5-eighty-a hundred-24 eighty -forty 9080 15.six 24 100 XHS3-1800D245711
NY5-100-ninety-28 100 -forty 11039 sixteen 28 90 XHS3-2000D245711
NY7-two hundred-a hundred and fifty-40 200 -twenty five 27434 seventeen.eight forty one hundred fifty XHS8-5000D485711
NY79-three hundred-one hundred fifty five-44 three hundred -sixteen 57776 seventeen forty four one hundred fifty five XHS7-3600D485711
NY79-350-150-46 350 -16 68768 sixteen.eight forty six 150 XHS7-4300D485711
NY79-400-a hundred forty five-forty eight 400 -sixteen 79808 sixteen.5 48 145 XHS7-5000D485711
All of the paramters can be custom-made primarily based on your necessity

Hydraulic winch set up

1, winch set up area and route, permitting the drum axis as the centre, any conversion placement.
two, set up the foundation plate bolt hole location set up. Note: The variety and dimension of fixing bolts should comply with the needs and
need to not be reduced or replaced with little diameter bolts.
3, winch flooring set up, must be mounted and reliable, shall not be bent in use, the set up of the flatness of not more than .5mm,
or else it will impact the clean procedure of the winch,
four, soon after the winch is mounted, the foundation get in touch with surface area need to be stage and power evenly.
5, to make sure that the vertical axis of the drum and the pulley vertical, vertical axis of the drum and the pulley angle of not a lot more than 1.5 levels.
six, winch oil handle valve must be a spring reset H-kind three-way 4-way valve, management valve installation area, in accordance to the needs
of the operation on the acceptable location.
7, brake valve (ie, sequence valve) to open up the strain need to be among 6 ~ 8Mpa, winch factory, the company has been modified,
you should do not modify.
eight, winch use a wide variety of instances, solitary-use, the hydraulic technique pressure, stream have to be steady with the specifications of the
recommendations, or else it will influence the support lifestyle of the winch. According to the demands of customers, the manufacturing facility can offer supporting energy source,
handle valves and connected pipelines.
9, beneath normal situation, when the operator going through the motor again to the operator comparatively near to the port to boost (into) the oil port.
This port can be dependent on the specific operator routines. But after you determine not to change it.
10, Prior to official use, you need to carefully examine the connection of the pipeline, lubricating oil level, air flow holes, program strain, and so forth.
After every thing is typical, flip back again and forth for 2 minutes.
eleven, winch rope fastened, the lifting, the rope should be wound on the drum initial 5 laps or much more.
12, do not stampede, collision winch metal pipelines and joints, so as not to hurt the winch.
thirteen, winch lifting hefty objects, pay unique focus to observe the motor drain port strain gauge, these kinds of as back again force over 1.4MPa,
the method have to be cautiously back again to the oil return line to make certain sleek.
At present, the system can not be used to carry men and women.

Nybon is a group of Lifting Enterprise with Abundant Encounter, sercving abroad assortment of buyers, including manufacturing unit lifting
perform, production and process industries, shipyardsports and terminals. No matter of your lifting demands, Nybon is
dedicated to delivering you with lifting gear and solutions that increase the worth and performance of your business

one. Q: What is your MOQ? 

  A: 1 Set 

two. Q: What is your package deal?

  A: Primary physique in plywood box or in plastic woven cloths Spare elements in plywood containers

3. Q: What is actually your shipping and delivery interval?

  A: Inside of ten/twenty five/forty times right after your prepayment obtained specific interval should be based mostly on thorough demands and
real period 

four. Q: What’s your warranty time period?

  A: twelve months from winches accepted 

5. Q: Do you have engineer ove ept installation service? 

   A: Sure We have 

6. Q: What kinds of merchandise do you have? 

    A: All sorts of industrial electric powered winch (especially non-standard) Overhead Crane Gantry Crane, Electric powered Hoist
Screw Hoist Radial/Flat Gate Hoist Metal Gate and so forth.  

7. Q: Could we get spare elements in neighborhood as soon as they are out of function? 

    A: Our primary electrical areas brand is Siemens or Schneider brand it really is extremely effortless to buy all the planet. But if there is
any issues, we can post to you by categorical, such as DHL, UPS, FEDEX, Aramex, etc.

8. Q: Do you offer raise tools?

    A: Of course, we can offer any types of elevate equipment such as raise sling belt, elevate clamp, seize, magnet , pulley blocks, hook,
lock catch, wire rope, fiber rope, and many others. 

nine. Q: Could your winches drag inclined? 

    A: Yea, our electric winches could drag horizontal, drag inclined, hoisting vertical.

 

The use of first tools manufacturer’s (OEM) portion numbers or emblems , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our business and the shown replacement areas contained herein are not sponsored, accepted, or manufactured by the OEM.

Various best made in China  replacement parts  in Nakhon Pathom Thailand Single Drum Hydraulic Winch 35ton with top quality

Various best made in China  replacement parts  in Nakhon Pathom Thailand Single Drum Hydraulic Winch 35ton with top quality