Tag Archives: phase machine

Steel 3 phase variable inductor Custom made in China – replacement parts – in Sanliurfa Turkey Drum Heat Transfer Printing Machine Production Line with top quality

Steel 3 stage variable inductor Custom made  manufactured in China - alternative areas -  in Sanliurfa Turkey  Drum Heat Transfer Printing Machine  Creation Line with leading quality

We – EPG Team the most significant worm gearbox, couplings and gears factory in China with 5 various branches. For a lot more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /

Comprehensive steel drum generation line

Item description

 

I. Uncooked supplies consumption/creation capacity
 

Plate thickness (mm) Finihed drums (pcs/T) Creation capability (kg/computer)
1.2 forty one 21.five
1.0B Up and bottom covers 1.two 47 19
Drum entire body 1.
1. 50 eighteen
0.9B Up and bottom addresses 1. 54 16.8
Drum body .nine
0.9 56 sixteen.2
.eight   ninety seven 10.28

 

II. Full metal drum production amenities

A. Entrance area equipment
1. Decolier
2. Hydraulic Up-coiling unit
three. Hydraulic supporter
four. Facet deviation rectifying unit
5. Sizing & flattening device
six. Slicing device – for drum body
7. Chopping device – for squander sheet
eight. Arch form guiding device
9. Stac ept auto
ten. Hydraulic program
eleven. Electrical control system
12. Best & Bottom go over conveyor device

one.Hydraulic Up-Coiling  Device

   a) Up-Coiling Help System is for storing metal coil and facillitate Material Feed Trolley for providing substance.

   b) Substance Feed Trolley is utilised for carry metal coil.. It is operated with hydraulic program to thrust cylinder for

   reciprocating linear movement and equipment box to supply steel coil in parallel to the center of uncoiling device so as to

   assure the correcting.

two.Decoiler & Hydraulic Supporter

a)Uncoiling width: 916-1320mm

b)Plate thickness: .6-1.2mm

c)Motor power: 5.0KW

d)Uncoiler capability: 10t

e)Within diameter: ¢470-520mm, Outside diameter: ≤¢1200

f)Device dimensions: 3900x1500x1940(mm), Complete weight: 5T

3.Sizing &Flattening Equipment
Limited introduction:7 rollers operating,servo automated sizing,worm and gear adjust the leveled plate thickness.

Purpose:The clearances of up and down rollers can be adjusted by the upper hand-wheel even though figure can be proven by dial indicator. The operation linear speed is adjusted step-considerably less. It can be controlled by the signal of mid-bridge for high and low speed change. 

Major technics:

a)Plate width: 916-1320(mm)

b)Plate thickness:.6-1.2(mm)

four. Chopping Machine
Purpose: Minimize the leveled steel plate into drum physique.

Main technics:

a)Plate width:≤1500mm

b)Plate thickness:≤3mm

c)Motor electricity: 3.0KW

d)Reducing capacity:≤20 instances/min

e)Device dimension:1800x950x1500(mm),Total excess weight: 3T

 5.Hydraulic Station

Perform:Give oil for the oil cylinder of decoiler, lifting device,uncoiling supporter,and overturn equipment to make confident stably operating.

Main technics:

a)Motor electricity:7.5KW

b)Device dimension:800x800x1500(mm),Total excess weight: .5T

six.Electric powered Management Program
Operate: Manage the decoiler,flattening device and other front section equipments operating.

B. Cover tools
one. Prime & Bottom go over mould
two. Double loc ept mould
3. 63T pressing device
four. 160T pressing device
5. Pre-coiling & Gluing machine

one. Top & Bottom protect mould

Limited introduction:Equipped with two sets of 160T urgent devices

Perform: Punching the bottom go over

Primary technics:

a)Motor power:eighteen.5KW

b)Wor ept capacity:5-26 pcs/min

c)Equipment dimensions:2185x1420x3070(mm),Overall fat: fourteen.5T

2.Drum Injection Mould

Brief introduction: Outfitted with a single established of 63T urgent device

Double punching mould: punch oil filler and breathable mouth of the base include.

Equipment dimension: 710x480x300(mm)

Total bodyweight: .5T

Double loc ept mould: lock oil filler and breathable mouth of the base go over.

Machine measurement: 710x480x300(mm)

Complete bodyweight: .5T

Main technics:

a)Motor electrical power: 11KW

b)Device measurement :1800x1232x2550(mm)

c)Overall fat: 5.5T

3.Pre-Coiling & Gluing Device

Short introduction: Pre-coiling device for the base go over, cylinder push the cam to perform, computerized glue- spaying method.It has benefits of basic safety,stablity, easy edging.

 Main technics:

a)Machine size:1600x1400x1350(mm)

b)Total excess weight: 4.5T

C. Center area tools

one. Stac ept desk
two. Circle-rolling device
three. Seam welding device
4. Edging & Beading device
5. Corrugation (W Rib) device
6. Edge-curling equipment
seven. Express unit
8. Electrical control technique
nine. Leakage chec ept device

1.Circle-rolling Device

Brief introduction:3 rollers working.

Major technics:

a)Rolled plated width:≤1100mm

b)Plate thickness:.6-1.2(mm)

c)Circle diameter:≤570mm

d)Motor electricity:1.5KW

e)Device dimensions:2200x750x1300(mm),Overall excess weight: 1.5T

two.Seaming Device(BH-one hundred fifty-5Z)

Short instruction:This computerized seaming device dismisses the spot welding approach,it is our recently  developed drum seaming device.All of elements adopts domestic superior uncooked material,cupreous welding rollers.

Principal technics:

a)Welding Machine capability:150KVA

b)Driving type: pneumatic 

c)Existing: alternating current

d)Frequency variety: high frequency

e)Wor ept theory : contravariant 

3.Edging&Beading Device

Limited introduction:managed by PLC,hydraulic push

Main technics:

a)Beading top:≤14mm

b)Drum top:894-905(mm)

c)Hydraulic technique stress:8Mpa

d)Air pressure:.1Mpa

e)Equipment dimensions:3700x700x1600(mm),Whole fat: 5T

Hydraulic Station:

Principal technics:

a) Device measurement: 1800x860x1700 (mm)

b) Total fat: 1T

c) Motor electrical power: 22KW

four.Corrugation (W rib) Equipment

Short introduction:controlled by PLC,hydraulic drive

Principal technics:

a)Corrugating top:≤3mm

b)W rib top:≤9mm

c)Drum peak:884-895(mm)

d)W rib space:280mm

e)Motor energy:11KW

f)Machine dimension:4500x650x2100(mm),Total excess weight: 7T

Hydraulic station:   

a)Device dimensions:1800x860x1700(mm)

b)Overall excess weight: 1T

c)Motor electrical power: 7.5KW

five.Edge-Curling Machine

Quick introduction:managed by PLC,hydraulic drive,7 layers edge curling.

Principal technics:

a)Drum peak:886-897(mm)

b)Motor electricity:45KW

c)Machine dimensions:4800x1300x2200(mm),Whole bodyweight: 13T

Hydraulic station:   

a)Equipment dimensions:1800x860x1700(mm)

b)Overall excess weight: 1T

c)Motor electricity: 7.5KW

6.  Leakage Chec ept Machine

Short introduction:Manual/automated control,pneuma lock.

Major technics:

a)Chec ept drum diameter:560-570(mm)

b)Drum peak:886-897(mm)

c)Pressure:.03Mpa

d) Device measurement:2530x700x1100(mm),Complete excess weight: 2T

seven.Multi-part Express System

Brief introduction:Express the drum human body to be edged,beaded,Corrugated W rib strengthened and sealed bottom go over with PLC controlling.

Major technics:

a) Motor energy:4.0KW

b) Equipment measurement:11000x2100x1000(mm)

c) Complete weight: 3T

D. Rear section gear
one. Front part trans-line
2. Degreasing & Phosphorization area
3. Washing & Drying space
four. Overturn gear
5. Painting area
6. Entrance drum-separation device
seven. Drying room after portray
eight. Bck drum separation device
9. Air cooling technique
ten. Rear section trans-line
11. Electrical control method

1. Degreasing & Phosphorization Room

Brief introduction: This element is used to transportation the drums,managed by PLC, adopts spraying system to computerized thoroughly clean the coil, phosphorize and washing the grease on the drums. The conveyor device adopts excellent metal, inwalls are produced of  1mm metal plate.

Major technics:

a)Machine measurement:36000x2110x2060(mm)

b)Whole excess weight: 30T

two. Washing & Drying Area

Short introduction:Drying the water on the floor of the drum, managed by PLC.The whole equipment adopts fuel heating devices.Supporter is installed on the leading of the space, so that sizzling and cycling wind can be produced to speed up the drying.

Principal technics:

a) Motor electrical power:25KW

b) Equipment size:20000x1920x3600(mm)

c) Total weight: 25T

3.Painting Area(double hues)


Perform:  The conveyor gadget is controlled by PLC, rotating table make the drums carefully, portray technique paint the drums in & exterior with the spray gun. 1 color or numerous can be different. Method of drinking water-curtain spraying dispels spraying smoke.Nozzle adopts Nordson Brand, Portray products is manufactured of Chang Jiang.

Principal technics:

a) Motor power: 55KW

b) Machine size: 7400x4990x3600(mm)

c) Total excess weight: 15T

four.Entrance Drum Distributor

Operate: Transport the drums to the conveyor line of outside the house portray&stiffening room, the cylinder is controlled by PLC.

Main technics:

a) Motor power: 2.0KW

b) Machine size: 1500x1050x800(mm)

c) Whole bodyweight: 1T

five.Drying Line after Painting

Operate: The conveyor device is managed by PLC, adopts fuel heating inwall of the space is geared up with heating tubes. Fan is installed on the best of the space, so that dry the paint.

Primary technics:

a) Motor electricity: 35KW

b) Device dimensions: 36000x2100x4300(mm)

c) Complete fat: 30T

6.Down-drum Roller Trans-line

Perform: The unit transports the dried drums to the floor.

Primary technics:

a) Motor electrical power: 1.5KW

b) Machine size:2000x900x800(mm)

c) Whole bodyweight: .3T

seven.Overturn Gear

Perform: Alter the point out of drums from horizontal to vertical, so that it will be much easier to paint, managed by Cylinder.

Main technics:

a) Equipment dimension: 1400x690x850(mm)

b) Whole weight: .5T

/ The use of original tools manufacturer’s (OEM) element numbers or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our business and the outlined substitute areas contained herein are not sponsored, approved, or created by the OEM. /

Steel 3 section variable inductor Customized  created in China - substitution elements -  in Sanliurfa Turkey  Drum Heat Transfer Printing Machine  Creation Line with prime high quality

Steel 3 section variable inductor Personalized  produced in China - alternative parts -  in Sanliurfa Turkey  Drum Warmth Transfer Printing Machine  Production Line with leading high quality